Sentence examples for tube load from inspiring English sources
The product of tube current and exposure time per rotation (i.e. tube load) was in the range of 15 300 mAs.
Images were obtained from C3 to the vertex using the following scanning parameters: detector rows, 16 collimations, 0.625-mm 0.625-mm.93 gentry rotation time, 1.0 s slice thickness, 0.625 mm tube load 380 mA, and tube voltage 120 kV.
Our results represent, therefore, a valuable confirmation that the use of IR algorithms preserves the spatial resolution while reducing mAs [21], except at very low tube load (i.e. < 50 mAs) where a very small decrease in spatial resolution was found [19].
Reduction of tube load may reduce patient dose considerably.
The DAP value was calculated by the X-ray system from the selected collimation, energy, tube load, and copper filtration.
The LDCT protocols were simply achieved by reducing the fixed tube load of diagnostic CT from typically 100 300 mAs to 10 40 mAs.
This paper describes a numerical study of the stress distribution in a pin-loaded tube, loaded in tension, where more than one pin is used.
Tube loading is no longer relevant for the newer multidetector-row CTs (MD-CT).
The downside is a relatively high radiation exposure of the patient and increased examination time and tube loading.
In all instances, this conversion amounted to <1%% of that demonstrated by the reactor tube loaded with catalysts.
The application of iDose constantly reduced it, even at decreasing mAs, and IMR kept it low while tube loading reduced to 50 mAs.
