Sentence examples for treatment of samples from inspiring English sources
The treatment of samples was done using acetylene gas, and the method is also described in detail in [18].
After the treatment of samples and positive control, cell viability was detected and a cell growth curve was graphed.
The sAfters anodised athe0 V presented the highest corrosion resistalkaliecause of treatmenttiof of the thin, compact oxide layer on the alloy samples.
Treatment of samples with chemicals (e.g. 30 35 % H2O2, 20 % HCl, 30 % NaOH), partly combined with increased temperatures, has been used to remove organic material and calcified structures.
Furthermore, DRL centers are extremely resistant to heat treatment of samples, and consequently, based thereon devices are not practically subject of degradation [3].
Treatment of samples with PMA in combination with diagnostic microarray detection can therefore be considered beneficial when analyzing mixtures of intact and membrane-compromised cells.
Treatment of sample with three hot ethanol (70%) washes to remove chlorophyll and other cellular debris did not alter the RCI measurement nor did the drying samples at 37°C for 7 days compared with drying at 80°C (data not presented).
A promising technique to overcome this problem is the pre-treatment of samples with nucleic acid intercalating dyes, such as propidium monoazide (PMA), prior to quantitative PCR (qPCR).
Pre-treatment of samples, chromatographic columns, mobile phases, elution gradients and ionization sources, were evaluated for the extraction of the maximum number of metabolites in red wine.
The method permits the direct determination of benzene without any pre-treatment of samples, with a limit of detection of 0.004% (v/v) and a variation coefficient of 1.2% (for 10 independent analysis of a gasoline sample containing 3% (v/v) benzene).
Extractions were performed by using 20 mL of sodium hydroxide at 0.1 M (two repeated extractions) after an ultrasound-assisted acid pre-treatment of samples to remove the carbonate fraction (ultrasound power at 17 kHz, 10 mL of 6.0 M hydrochloric acid for 15 min).
