Sentence examples for treated specimen from inspiring English sources

The results show that chip seal treated specimen with pre-wash yields higher pull-off tensile strength than chip seal treated specimen without pre-wash.

The FPP treated specimen prior to gas nitriding exhibited the highest fatigue strength.

Comparison with the substrate, the maximum microhardness of treated specimen is increased by 28.4%.

Afterward, the treated specimen was coated with Si-Mo-W-C ceramics by the pack cementation.

The wear volume of duplex treated specimen after a wear test at 500 °C, comparing the duplex treated specimen with the specimen treated only by boronizing, was reduced by a factor of 1.5.

The 460 °C/8 h treated specimen has the best wear and corrosion resistance in the present test conditions.

WLP treated specimens exhibited more stable high-temperature tensile properties.

In addition, the WLP treated specimens exhibited a ductile fracture mode, which was totally different with the ductile-brittle mixed fracture mode in untreated and LP treated specimens.

These treated specimens were subjected to unconfined compression, direct shear, swelling and shrinkage tests.

The decrease in corrosion current densities was significant for coated and treated specimens.

Moderate checking also occurred in all treated specimens but was more marked in the specimens treated with 1% nano-Zn than the higher treatment concentrations (Table 2).