Sentence examples for transverse width from inspiring English sources

Anterior to the orbits the skull table is strongly expanded transversely at the level of the prefrontals (maximum transverse width of 30 mm as opposed to 17 mm across the orbits), similar to the condition in T. dabanensis and G. stipanicicorum (MCZ 4117), as well as in some other pseudosuchians such as ornithosuchids [ 34].

The aspect ratio between the building's height and transverse width is about 9, which has largely exceeded the criteria in the current design codes and standards in China.

Unlike conventional transverse width (CTW) mode in which the resonating direction and the acoustic beam direction are identical, in the TROB mode, the active material is set in resonance in half-wavelength mode in one transverse direction and the acoustic beam is generated in the CTW beam direction, the latter being orthogonal to the resonating transverse direction.

As the collimated beam in the transformed system has a larger transverse width, we obtain a beam profile of more pixels filled with non-zero values.

(1) Road segments with curb parking should have enough transverse width to support the motor or non-motor vehicles travelling in this width after parking.

The largest transverse width (LTW) and anteroposterior length (APL) on each axial plane (CV1, CV2, CV3) were measured at T0 and T1 Fig. 3 Evaluation of the pharyngeal airway changes.

The linear distances measured included buccal, lingual, and centroid transverse widths at the level of canines, premolars, and molars as well as arch depth and arch perimeter.

Both expansion modalities produced increases in the upper molar transverse widths (um-um) of about 9.17 mm in the RME group and 10.22 mm in the MME group, with no significant difference between the groups.

In both experimental groups, significant increase in the maxillary transverse widths (mx-mx) of about 6.07 mm in the RME group and 6.57 mm in the MME group was obtained.

Both expansion modalities produced increases in the lower molar transverse widths (lm-lm) of about 2.67 mm in the RME group and 3.54 mm in the MME group, with no significant difference between the groups.

Table 5 The calculation result of transverse residual width W S Road name Remaining width W S (m) Average speed (km/h) Critical width of W S (m) Calculation method Shenban Rd. 3.28 32.5 5.7 Acceptance gap Dengyun Rd. 2.70 31.2 5.7 Acceptance gap Shangtang Rd. 4.26 39.4 5.9 Acceptance gap Xiangjisi Rd. 3.95 42.6 5.9 Acceptance gap.