Sentence examples for transverse error from inspiring English sources

The number of errors in the remaining central region was defined as the difference between the total number of errors found in the whole scan and the number of peripheral errors.> -wrap-foot> When retinal boundary detection errors were present in both the inner and outer retinal boundaries, the errors were summed to assess the severity of the axial or transverse error.

Table 2 Experimental results Type Success Error Transverse (T).

The maximum value of the transverse and longitudinal coordinate error is seen as the error of center positioning for each image.

As can be seen from the presented results, HOSNT11 computes very accurate results with 0.007 % errors in the in-plane displacements and 0.005 % error in transverse deflection for isotropic plates.

It is clearly seen from the presented results that HOSNT11 computes the most accurate results with zero errors in the in-plane displacements and 0.013 % error in transverse deflection for orthotropic plates.

The strip shape standard curve in a tandem cold rolling mill was established to compensate for the comprehensive effects of the strip coiling shape variation, fetching machine installation error, strip transverse temperature difference, edge drop control, and other factors[37], and both the shape quality and the edge drop quality are improved.

The initial MANOVA returned no significant differences in trunk repositioning error in the transverse plane between the athletes with and without a history of LBI (p = 0.25) or between those who did and did not sustain a LBI during the follow-up period (p = 0.63) (Table 2).

On comparing the amplitudes of cutting forces, it is seen that mechanistic model predicts the transverse force with an average absolute error of 12.29%, while a higher prediction error of 19.49% is obtained for feed force.

However, orientation with this method alone is limited to the coronal plane (abduction/adduction) and arguably causes rotational errors in the transverse plane (internal/external rotation).

The error in values of transverse shear stresses decreases as the number of lamina increases, for a plate of same thickness.

As the IVC does not demonstrate uniform diameters along its course through the abdomen, error occurs in (B) transverse imaging where probe movement results in measurement of IVC diameter at different anatomic locations.