Sentence examples for transverse bars from inspiring English sources

Internally, the transverse bars reinforcing the soundboard were replaced by radial bars that fanned out below the sound hole.

This is mainly due to the confinement provided by transverse bars.

Confining reinforcement in the form of transverse bars and vertical shear studs is also installed in the joint.

The effect of the transverse bars in the grid on the cracking and the cracking moment is indicated.

The contribution of the UHPFRC also can be observed in Fig. 9, where the strain of transverse bars at the mid-height is plotted (yield strain of the transverse bars ɛ yt  = f yt /E st  = 0.0018).

As shown in the figure, the transverse bars of HCC2 and HCC4 (V f  = 2.0%) yielded before the peak load, indicating that the axial load increased even after the yielding of transverse bars.

The chisel plow, or ripper, has several rigid or spring-toothed shanks with double pointed shovels mounted on a transverse bar at intervals of one to three feet.

The design factors most related to transverse cracking are longitudinal restraint, deck thickness, and top transverse bar size.

This history of bar evolution compares well with the central-bar initiation and transverse bar braiding mechanisms described in flume studies except for change in bed-material.

The researchers determined that the most related design factors to transverse cracking were longitudinal restraint, deck thickness, and top transverse bar size.

In HCC4 with the greater fiber content and lower transverse bar ratio (Fig. 6d), the first crack occurred under 2351 kN, similarly to HCC2.