Sentence examples for transverse bar from inspiring English sources

The chisel plow, or ripper, has several rigid or spring-toothed shanks with double pointed shovels mounted on a transverse bar at intervals of one to three feet.

This history of bar evolution compares well with the central-bar initiation and transverse bar braiding mechanisms described in flume studies except for change in bed-material.

Bi-Steel is an innovative form of steel concrete steel sandwich construction invented by Bowerman [Bowerman H, Coyle N, Chapman JC. An innovative steel/concrete construction system. The Structural Engineer 2002 80(20):33–8], in which the two steel plates are inter-connected by a series of transverse bar connectors simultaneously friction welded at both ends.

The design factors most related to transverse cracking are longitudinal restraint, deck thickness, and top transverse bar size.

The researchers determined that the most related design factors to transverse cracking were longitudinal restraint, deck thickness, and top transverse bar size.

In HCC4 with the greater fiber content and lower transverse bar ratio (Fig. 6d), the first crack occurred under 2351 kN, similarly to HCC2.

Internally, the transverse bars reinforcing the soundboard were replaced by radial bars that fanned out below the sound hole.

The effect of the transverse bars in the grid on the cracking and the cracking moment is indicated.

Confining reinforcement in the form of transverse bars and vertical shear studs is also installed in the joint.

The practice of tying individual transverse bars to other reinforcement in order to reinforce these shear surfaces, even if done reasonably simply, is costly and labor intensive.

The column is designed with section dimension of 400/400 mm, with the main reinforcements of 6 D16 + 4D13, and the transverse bars of ∅ 10-50 mm.