The phrase 'translation position' is correct and can be used in written English.
It is typically used to refer to the position of a text when it is translated from one language to another. For example: "The main challenge in this translation position is finding the best way to convey the tone of the original."
HRC is at a stowed position (the SIM translation position has ACIS in the viewing position).
Feature extraction and tracking approach are used in the imaging framework to estimate the target's translation, position, and distance.
When the moving platform stays at a given translation position, the parallel manipulator can represent three-dimensional rotating gait motions of the hip joint for the purpose of evaluating the friction characteristics of biological materials.
However, for increasing the transmission ratio in meshing, decreasing the deviation angle may be more effective than decreasing the deviated translation position (see Fig. 14).
The backstepping strategy is used to achieve good tracking of desired translation positions and yaw angle while maintaining the stability of pitch and roll angles simultaneously.
The analytical model was tested experimentally by examining the levitation and translation positions of a surface micromachine under both compensated and uncompensated signals.
b Effect of translation positioning deviation on rotation transmission.
The effect of the deviation angle θ for various values of the translation positioning deviation Δ y is presented in Fig. 14a.
The RMS error of each method was calculated by comparing the corresponding A-scan positions against the gold-standard translation stage position data.
In Fig. 4 the single photon interference pattern of the signal photons as a function of the translation stage position (longitudinal delay) is shown while overlaying the same spot of the light cone (signal 2 is the same mode as signal 1).
Disregarding, for the moment, any complex distortions or aberrations, the main differences between the two modes should be accounted for by some amounts for translation (detector position mismatch), rotation (detector orientation mismatch) and magnification (field of view mismatch).
