Sentence examples for transients where from inspiring English sources

The ability of SCTRAN code to simulate transients where both supercritical and subcritical regimes are encountered has been verified by comparing with APROS and RELAP5-3D codes.

The proposed procedure of modeling and the simulation method are useful tools that can be applied to other electrical transients where extremely stiff systems appear.

On the other hand, using a wider window for the mean allows to obtain a more robust estimate of the source shape in transients where harmonic sinusoidal parameters are less reliable than in voiced segments.

Frequent failures of tank level controller lead to transients where the operation of shutting down RD pumps requires operators to manually isolate the quenching water and to close the main steam admission valves.

The overall objective of OECD/NEA V1000CT benchmark is to assess computer codes used in analysis of VVER-1000 reactransientsnsients where mixing phenomena (mass flow and temperature) in the reactor pressure vessel are complex.

The inter-play between the inner and outer channels of the IXAF was mainly beneficial except in the case of sudden reactivity insertion transients where additional control consideration is required.

The second type is much longer lived transient, where the power being supplied is extremely noisy due to the physical insertion of the device into the USB port.

For different types of AuNPs, the effects have been described to be dependent on intracellular AuNP concentration and to be transient, where after recurrent cell divisions, the intracellular AuNP concentrations decrease exponentially and the effects are no longer observed.

The model is also used to predict the OFI locus during a transient, where it shows good agreement with the short transient data of Lee and Bankoff [Lee, S.C., Bankoff, S.G., 1993. Prediction of the onset of flow instability in transient sub-cooled flow boiling. J. Nucl. Eng. Des. 139, 149 159] as well.

A delayed supply of the auxiliary feedwater after an excursion of the heater surface temperature successfully cooled the primary system until the end of the transient, where inflow of the coolant from the pressurizer contributed to a recovery of the coolant inventory in the core.

These elevations were generally mild to moderate and were transient, where follow-up information was available in the included RCTs.