Sentence examples for transient blackout from inspiring English sources

For RAND, since the hop count is large (see Figure 10), it is more likely for a packet to encounter the transient blackout period during its end-to-end trajectory, thus leading to higher drops and low PDs.

Due to postural mobility, there are transient blackout periods during which a neighbor may appear to be connected in a node's neighbor table, when in fact it is no longer connected.

Lower hop-counts (see Figure 10) for the locality-based protocols, namely, UTILITY, PRPML, and DVRPLC, suffer from fewer drops due to the relatively lower occurrences of the transient blackouts.

A reactor vessel auxiliary cooling system (RVACS) and four redundant passive secondary auxiliary cooling systems (PSACSs) are used to provide passive heat removal, and are able to successfully mitigate both the unprotected station blackout transient as well as protected transients in which a scram occurs.

The reliability of the chosen design during the bounding transient, a station blackout, is calculated.

The importance of the observed differences was demonstrated by performing a simulation of a Station Blackout transient with the RELAP5 computer code for a lead-cooled fast reactor.

To get a comprehensive understanding of their transient characteristics, SBO (station blackout) and SBLOCA (small break LOCA) are simulated and analyzed respectively by using Relap5/Mod3.2.

The transient simulation of station blackout (SBO) using the RELAP5-3D/ATHENA code shows that inherent shutdown without scram can be accommodated within the cladding temperature limit by the enhanced RVACS and a minimum (two) number of PSACS trains.

According to PRA studies, three categories of events are primarily responsible for the risks associated with LWRs namely, station blackout, so-called transient without scram, and loss of cooling.

The ATHENA computer code was used to simulate various transients without reactor scram, including a primary coolant pump trip, a station blackout, and a step reactivity insertion.

The transient characteristics of the primary loop and the EPRHRs were calculated in the event of station blackout accident.