Sentence examples for transformed section from inspiring English sources
Such lawyerdom is how the NSA in 2006 transformed section 215's allowance to collect data "relevant" to an ongoing investigation into the ongoing bulk collection of US phone data – a construction that a federal appeals court rejected as illegal earlier this month.
The design procedure is based on the transformed section method.
Eurocode-3 reduction factors and transformed section method are both adopted for steel I-sections.
D fc is calculated by the transformed section, D f c = 23 P u L 3 648 E w I t r (3)where I tr is the transformed section moment of inertia.
Finally, this work includes also the results obtained using the transformed section to predict the stiffness increase that the different types of reinforcement analyzed produces.
For a fully composite panel, the entire panel acts as a single unit in bending and the flexural design of fully composite panels can be considered as I-shaped section applying transformed section method (PCI Sandwich Wall Committee 1997).
During loading, localized nucleation of martensite results in a high curvature for the transformed sections of the tube and low curvature for the untransformed.
kern-0pt} {left( {frac{L}{2}l_{s}^{2} - frac{2}{3}l_{s}^{3} } right)}} (7 where I s and I c are the moments of inertia of the transformed sections in cracked condition, before and after debonding failure, respectively.
A widely accepted approach for quantifying the serviceability short term deflection of RC beams is to use some combination of the flexural rigidities of the uncracked (EIfi-uncr) and cracked (EIfi-cr) sections that are obtained from a full-interaction analysis of transformed sections; a full-interaction analysis implies that there is no slip between the reinforcement and concrete.
Similarly, the whole two sets of coefficients obtained by the angular-radial transform (Section 5.1.4) are kept.
A set of analytical models has been developed to describe functional grading and hierarchy in honeycombs, based upon beam mechanics and the transform section method.
