Sentence examples for transfer voltage from inspiring English sources

Though any source variable can be transferred to any number of any target variable, it generally only makes sense to transfer voltage values.

The observed improvement in fuel cell performance was attributed to a decrease in mass transfer voltage losses (permeability and diffusion), due to an increased pressure drop.

Particularly, in HV applications like BMS (battery management system), the signal conditioning circuits are always used to transfer voltage signal between HV domain and low voltage (LV) domain.

For mass spectral analysis of the amphipol alone, a cone voltage of 70 V, a trap voltage of 6 V, and a transfer voltage of 4 V was applied.

Asymmetric attenuation of voltage, which is a function of asymmetric input resistance, was seen between all pairs of dendritic sites but the transfer voltages (voltage recorded at the opposite site from stimulation among a pair of dendritic sites) were equal and also summed linearly with local voltage responses during simultaneous stimulation of both sites.

In an effort to identify trends with inter-turn fault locations and frequency responses, this research investigates the effect of the location of deliberately initiated internal faults on parameters such as transfer voltages and input impedances by means of sweep frequency response analysis (SFRA).

By using high transfer voltages during the transfer of electrons on the register, the EMCCD camera can amplify electrons on the CCD chip.

Parameters were as follows: capillary, cone and transfer voltages were set to 1.3 kV, 80 and 5 V, respectively.

For tandem MS experiments, the backing pressure was reduced to 1.4 mbar and the trap and transfer voltages were increased to 60 V and 20 V respectively.

By measuring the frequency response, the resonant frequencies can be found and the amplitude of the transferred voltage at these frequencies can be compared.

In this paper, the effects of axial displacement on impulse and transferred voltage distribution are investigated with the help of two particular windings having the rated power of 1.3 MVA as a test object and its detailed model.