Sentence examples for transfer of stress from inspiring English sources

A series of 15 experimental tests have been conducted to investigate the transfer of stress through a steel-concrete adhesive bond.

The results from experimental tests conducted to investigate the transfer of stress through a steel concrete adhesive bond by Barnes and Mays [The transfer of stress through a steel to concrete adhesive bond. Int J Adhes Adhes 2001 21 495 502] combined with the shear strengthening and testing to failure of 30 reinforced concrete beams (Part 1 of this paper) was examined.

The strength improvement in the infiltrated scaffolds was attributed to two different contributions: the sealing of precursor flaws in the ceramic rod surfaces and the partial transfer of stress to the polymer, as confirmed by finite element analysis.

In situ Raman and XRD measurements during tensile deformation indicate that the transfer of stress between bundles in the fibre is not uniform, with the Raman peak downshift rates for the D, G and G′ bands varying by as much as a factor of 2 in different areas of the fibre.

Addition of 6% (wt/wt) of MAPP resulted in a significant enhancement in the tensile strength in line with the improvement of the fiber matrix interfacial adhesion making more effective the transfer of stress from the matrix to the rigid reinforcement.

That was surprising, Ryabinin says: "Frankly, we thought that it was the transfer of stress or arousal" that had caused the effect.

A uniform and smooth transfer of stresses across the polymer matrix/fiber interface is enhanced when adhesion between the matrix and fiber surface is optimized.

This is because filler particles act as a barrier in transferring stress from one point to another, and an increase in SiC content beyond 10 wt.% results in the increase of transfer of stresses from one point to another.

ODOT does not allow the use of precast deck panels, since they have shown cracking problems at the joints between the panels, and there are questions on the transfer of stresses in the finished deck sections.

A third (imaginary) material was proposed to block the transfer of thermal stress between the filler and matrix in the unsilanized model.

However, the mechanism for the transfer of the stress fluctuation from the Test Well to Mqs2 is still unclear.