Sentence examples for traces with different from inspiring English sources

We consider a total of eight mobility traces, with different vehicle densities.

We calculated longitudinal-direction quench propagation velocities from the voltage and temperature traces with different transport current.

In this context, Jabbarifar [17] proved that traces correlation can be achieved through synchronization, merging two or more traces with different timestamps' origins into a single one with the same (fictitious) time origin.

However, although this does not represent a problem from a graphical point of view, traces with different sizes and different time scales would result difficultly comparable from an analytical perspective.

E.g., in the case of two traces with different samplings (as in fig. 4), a slightly warping effect might be noticed at a certain point in their time scales.

It is observed that at temperatures 375° C and above, two semicircles can be traced with different values of grain (Rb) and grain boundary (Rgb), and their values can be obtained from the intercept of the traced semicircles with Z / axis.

c Amplitude spectrum of 45-Hz synthetic signal Table 1 Amplitude loss with different methods Frequency 25 Hz 35 Hz 45 Hz FX-DECON 9.60 25.43 43.26 TFPF 16.21 21.83 35.45 PT-TFPF 17.26 12.77 17.66 AL-TFPF 5.03 7.18 6.32 Open image in new window Fig. 13 Amplitude spectrums of single trace with different methods.

Finally, an additional simulation campaign using other mobility traces (possibly with different social characteristics) could reveal the robustness of Social Routing against diverse scenarios and prove the generality of the key ideas.

Sequential extractions describe the association of trace elements with different geochemical fractions but are time consuming, costly and provide excessive detail.

The initial state of the TCP connections is chosen with uniform probability between 1 and I p, while all the UDP objects start from state 1. Figure 2 shows a comparison between the mean field limit and a simulation trace obtained with different numbers of objects in terms of normalised queue length.

Sinusoidal response can evaluate the tracing result with different frequency and amplitude, and its control result indicates the response performance and the control accuracy, so the sinusoidal signal is chosen as the input signal to analyze the system parameter sensitivity of the HIVC force control system.