Sentence examples for toughness characteristics from inspiring English sources
The importance of fiber geometry and matrix strength on the toughness characteristics of SFRC has been clearly established by earlier researchers (Soroushian et al. 1992).
As the composite formed by mixing fly ash, lime and gypsum with treated tire chips has shown increased toughness characteristics, hence the composite material find new application in those construction where there is more requirement of toughness characteristics.
Indirect tensile strength and toughness characteristics are evaluated at ambient temperature and after heating of the specimens at 280 °C.
The crack properties and toughness characteristics in AISI 316L weld metals were investigated in different chemical composition ranges of Cr and Ni contents.
The ultimate aim of the study was to modify the brittle epoxy matrix by liquid rubber to improve the toughness characteristics.
It has been observed that the tensile load, diametral strain and toughness characteristics of the reference mix mixed with dry tire chips can be increased by providing surface treatment of tire chips with carbon tetra chloride, sodium hydroxide and water.
The R-curve is computed for this material using a micromechanical embedded model corresponding to the intralaminar transverse tensile fracture toughness characteristic.
In this study, the effect of silica fume, styrene butadiene rubber (SBR) latex, and recycled asphalt pavement (RAP) on the mechanical properties (compressive, flexural and splitting tensile strength, module of elasticity and toughness), permeability characteristics (water penetration depth, rapid chloride ion penetration, electrical resistivity) were assessed.
A two-parameter model with a characteristic toughness and a characteristic strength can be used to predict the fracture of notched or cracked specimens.
The test results show that at the early age, fracture energy, effective fracture toughness, and characteristic length remained almost constant during drying.
Concrete fracture energy, effective fracture toughness, and characteristic length were tested at five different ages using wedge splitting specimens exposed to four different relative humidity values (30%, 50 %, 70 and 98%and98%
