Sentence examples for torque spring from inspiring English sources

Besides, parametric studies indicate some rules to design preload and stiffness coefficient of torque spring, equivalent stiffness coefficient of CCL mechanism and stiffness and damping coefficient of latch mechanism.

Considering torque spring, close cable loop (CCL) configuration and latch mechanisms, a typical spacecraft composed of a rigid main-body described by NCF and two flexible panels described by ANCF is used as a demonstration case.

This paper numerically investigates the effects of torque spring, close cable loop (CCL) configuration and latch mechanism on the overall dynamic characteristics of a deployable solar arrays system considering joint clearance; and presents significant guidance for the key parameters design of these three mechanisms.

The syringe carrier also incorporates a constant torque spring motor, which causes the positioning guide to retract automatically and holds it in the retracted position until the operator has reinserted the cannula and is ready to begin another injection stroke.

Repeated measures ANCOVA with grip endurance time as a covariate indicated that forearm rotation angle (p=0.001), elbow flexion angle (p=0.016), MVC torque (p=0.001) and frequency (p=0.049) were significant.

Four electric motors at each wheel, generating a total of 313 horsepower and a roll-your-eyeballs-back explosion of torque: 3,319 pound-feet, about 10 times that of the gasoline-powered R8 V-8.

In such structures, the pure spin polarized current originates from the electric current in heavy metal due to strong spin orbit coupling and Rashba effect, which is named as spin orbit torque (SOT 23,24.

Second row forwards performed the best in the measure of peak flexion (44.04; 40.41–47.67 Nm) and lateral flexion right (69.42; 63.36–75.48 Nm) and left (66.31; 61.21 71.41 Nm) torque, while the front row forwards performed best in peak extension torque (65.60; 62.12 69.08 Nm).

Results: Although peak and average torque were significantly less for the hemiparetic limb compared with the noninvolved limb, the intraclass correlation coefficients (ICCs) between the 2 test sessions were high (.95 .99 for peak torque,.88 .98 for average torque) for both limbs for all 3 joints.

For analysis, the results at engine speed of around maximum torque (3000 rpm) are chosen in Figs. 5 and 6.

However, such assumption will result in unreasonable small system capacity, since small D means small torque (13).