Sentence examples for torque effects from inspiring English sources

The results show that force and torque effects of virtual fluid environment on robotic gait trainer were achieved.

Increased surface area of the lead tip in contact with soft tissue can result in reduced torque effects and a better cooling mechanism.

Due to tunneling magnetoresistance and spin transfer torque effects, a much stronger coupling between the spin (magnetization) orientation and charge current is achieved in magnetic tunnel junctions.

As all heat release parameters were kept the same in the AHS and FHS cases, the changes in instability can not be attributed to the dilation or baroclinic torque effects in vorticity reduction, or the increase in viscosity associated with the heat release, but are fundamentally linked to a change in the instability at the splitter plate.

The longitudinal-crankshaft layout has given previous Guzzis and similar BMW boxers an odd torque effect, especially noticeable at a stoplight, when a quick blip of throttle rocks the bike to the right.

All four forces lift, thrust, drag, and weight interact continuously in flight and are in turn affected by such things as the torque effect of the propeller, centrifugal force in turns, and other elements, but all are made subject to the pilot by means of the controls.

Magnetic field interactions include torque effect, induced electrical currents and reed/Hall sensor switch activation.

To illustrate the impact of particle rotation caused by the viscous torques on the particle trajectory, a set of simulations was performed with and without viscous torque effect.

The reduced strains associated with wider implants may be due to the increased structural capacity and the enlarged resin-implant contact area offered by these implants, resulting in lower torque effect in conjunction with off-axial loading [20].

Dasgupta et al. [1] hypothesized that a sacral fracture might impart a torque effect to the pelvic girdle, which then fractures in the mechanically less sound portion, such as the pubic ramus.

An analytical model taking into account the bolt torque effect and interfacial stress equilibrium has been developed to predict the strength enhancement effects of washer clamp-up and CFRP reinforcement on the open-hole plates in different failure modes.