Sentence examples for top thickness from inspiring English sources

2008 iMac (right) and 2012 iMac (left) top thickness comparison.

In all presented calculation results, the top thickness W is taken as 0.4 nm.

The open-ended piles have 50 mm of outer diameter (D), 380 mm of pile length and 2 mm of top thickness (t top).

Figure 6 shows a photograph of the MSC-PA housed in aluminum chassis (side and top thickness 2 mm; bottom thickness 3 mm).

The main objective of the interpretation in this case is to retrieve the characteristic inverse parameters of the 3D approximative model: depth to the top, thickness, extension in depth, extension in the strike direction, and direction and amount of dip.

The most common for this project are made from untreated pine 4 x 4-inch (6.2 x 6.2 cm) posts cut to the length you chose for the height of the table minus the top thickness.

A parametric study is performed to examine the top cover thickness and the critical fire exposure curve needed to fully degrade the top GFRP bars while achieving certain fire ratings for the deck considered.

A parametric study is performed to examine the top cover thickness and the critical fire exposure curve needed to fully degrade the top GFRP bars while achieving certain fire ratings for the bridge deck considered.

The negative moment at the interior support is resisted by 9 #25 (Area = 510 mm2 per bar, total area = 4590 mm2) diameter GFRP bars located with a typical top cover thickness of 25 mm as shown in Fig. 2.

In some areas the top cover thicknesses were 20 or 30 mm (Fig. 12b).

The top concrete cover thickness is the most important parameter that influences the fire resistance of concrete slabs when exposed to top fire loading.