Your English writing platform
Discover LudwigSuggestions(1)
Exact(13)
The classic nine-ounce julep cup, originally made of coin silver, is a specific size and shape: three and a half to four inches tall, with a top diameter of about three inches, a flat bottom and straight sides that flare slightly.
It is also seen that the top diameter of the Si nanostructures decreased as the Ag ink ratio was decreased.
Note that the diameter of PS nanospheres after the Cl2 plasma etching approximately defines the top diameter of SiNCs formed.
Each selected tree was felled then cut into sequential, parallel 30-mm discs from the butt to a top diameter of approximately 50 mm.
Finally, when 50°C was presented, uniform dumbbell-like particles with a handle diameter of 160 nm and a top diameter of about 200 nm were observed, and the length of the particles is about 340 nm (Figure 3C).
RDR was evaluated quantitatively (as an index for RGA) based on the basket method that uses open stainless-steel mesh baskets (top diameter of 7.5 cm and depth of 5.0 cm; PROUD, Ushiku, Japan), as described previously (Uga 2012).
Similar(47)
Small top diameters of nanopillars also ensured the metastable Cassie Baxter state based on energy barrier calculations.
Fig. 1 SEM images of nanorods with top diameters of a 120, b 200, and c 300 nm.
Then the top diameters of these NWs start to increase due to the deposition of a-Si H on the top pa-Si H
The NWs reveal tapered morphology with base and top diameters of about 200 nm (Figure 4a,b) and 20 nm (Figure 4c), respectively.
With the increases of OT, the top diameters of the NCs will be enlarged as depicted in Figure 2, which will enhance the guide modes coupling [25,29] in the top NCs.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com