tolerance deviation

USAGE SUMMARY

"tolerance deviation" is correct and usable in written English. You can use it in contexts related to engineering, manufacturing, or quality control where variations from a specified standard are discussed. For example: "The tolerance deviation must be within acceptable limits to ensure product quality." Alternative expressions include "tolerance range" and "acceptable deviation."

✓ Grammatically correct

Science

Human-verified examples from authoritative sources

Exact Expressions

2 human-written examples

The trajectory calculated from Hall probe measurements of the assembled device was within the specified tolerance (deviation <2 μm in both planes) but showed a trajectory offset and kick at the entrance.

Free Electron Lasers 2002 Proceedings of the 24th International Free Electron Laser Conference and the 9th FEL Users Workshop, Argonne, Illinois, U.S.A., September 9–13, 2002

To check the consistency of the fuzzy pairwise comparison matrices, the fuzzy consistency test with tolerance deviation model proposed by Leung and Cao [16] is used: begin{aligned}&left( { {begin{array}{c@{quad }c@{quad }c@{quad }c} 1& {r_{12} }& ldots,& {r_{1n} } {r_{21} }& 1& ldots,& {r_{2n} } .& ldots,&.

Complex & Intelligent Systems

Human-verified similar examples from authoritative sources

Similar Expressions

58 human-written examples

BS EN 20286 Part 1 describes the ISO system of limits and fits, which provides the basis of tolerances, deviations, and fits.

Manual of Engineering Drawing

Participants showed greater agreement on the best proportions of faces they considered more humanlike and more attractive and less tolerance for deviation from these proportions in more attractive faces.

Computers in Human Behavior

These data provide clues about the accessibility of the enzymic active sites, as well as the tolerance to deviation in ligand position.

Plosone

Assuming an effect size is 1, that is, ratio of tolerance limit/standard deviation, a sample size of 18 patients was estimated to have 95% power to test for noninferiority with a significance level α = 0.1 (one tailed).

BioMed Research International

Determining what the specification should be, as well as the tolerances for deviation, comes through rigorous scientific trials.

Science Magazine

We show that while in conditions of minimal T1-weighting, high SNR, and large duty cycle the solutions of the three equations are consistent, they have a different tolerance to deviations from the basic assumptions behind their development, which should be taken into account when designing a quantitative MT protocol.

Journal of Magnetic Resonance

The optimal w for each map was chosen based on 2 criteria: the first was good tolerance of deviations up to 6° from a correct position, thus the scores of such matches were close to the score of the identity match (≥80%).

Plosone

For bearings of standard tolerances these deviations are large enough to cause measurable levels of vibrations when the bearing is in operation.

Journal of Sound and Vibration

This system includes camera, lens, peripheral components, software, signal transport and display equipment which were not optimized and matched with each other and are having large tolerances and deviations.

EURASIP Journal on Image and Video Processing

Expert writing Tips

Best practice

When using "tolerance deviation", clearly define the parameters and units of measurement to avoid ambiguity. For example, specify if the deviation is a percentage, an absolute value, or a standard deviation.

Common error

Avoid using "tolerance deviation" without specifying the scale or context. Without clear parameters, the phrase can be vague and lead to misinterpretations. Always quantify the acceptable limits to ensure clarity.

Linguistic Context

The phrase "tolerance deviation" functions as a noun phrase, typically used in technical or scientific contexts. It describes the amount of permissible variation from a specified standard. As seen in Ludwig, it often appears when discussing measurements and acceptable errors.

Expression frequency: Rare

Frequent in

Science

100%

Less common in

News & Media

0%

Formal & Business

0%

Ludwig's WRAP-UP

In summary, "tolerance deviation" is a noun phrase used to describe the acceptable amount of variation from a standard, primarily in technical and scientific domains. Ludwig AI analysis shows that it's grammatically correct but relatively uncommon. When using the phrase, it's important to specify the units and scale to avoid ambiguity. Alternatives include "allowable variation" and "acceptable error". Remember that clarity and precision are key when discussing deviations in any field.

More alternative expressions

Phrases that express similar concepts, ordered by semantic similarity:

tolerance limit

Focuses on the maximum allowed deviation.

specified tolerance range

Clearly indicates the range within which variations are tolerated.

allowable variation

Focuses on the degree of variation that is permitted or acceptable.

deviation threshold

Specifies the limit beyond which deviations are unacceptable.

acceptable error

Emphasizes that errors are within acceptable bounds.

variance threshold

Specifies the threshold for acceptable variance.

margin of error

Highlights the allowable error in a measurement or calculation.

error allowance

Emphasizes the amount of error that can be allowed.

permissible difference

Highlights the extent to which something can differ and still be acceptable.

acceptable disparity

Highlights that differences are allowable within certain constraints.

FAQs

What does "tolerance deviation" mean in a technical context?

In technical fields, "tolerance deviation" refers to the permissible or acceptable amount of variation from a specified standard or target value. It indicates how much a measurement or result can differ from the ideal without being considered unacceptable.

How do I use "tolerance deviation" in a sentence?

You can use "tolerance deviation" to describe the allowable error in a process or measurement. For example, "The "tolerance limit" for this manufacturing process is a 5% deviation from the specified dimensions."

What are some alternatives to "tolerance deviation"?

Alternatives include "allowable variation", "acceptable error", or "specified tolerance range", depending on the specific context and nuance you wish to convey.

Is "tolerance deviation" a commonly used phrase?

While grammatically correct, "tolerance deviation" is not as common as related phrases like ""tolerance limit"" or "margin of error". Its usage is primarily confined to technical and scientific writing.