Sentence examples for to absorber from inspiring English sources

where x refers to absorber plate or glass, and d is the channel gap.

As Fig. 3 shows, flue gas is cooled to a lower temperature before introduced to absorber.

The ratio of feed to absorber did influence the temperature profiles of the EFB pellets and also pyrolysis products such as bio-oil, char, and gas.

As for this latter application, the results of our investigations on SWCNH suspensions show that they can be promising, especially when they are compared to absorber materials currently used in liquid phantoms, i.e., Indian inks [17].

The proposed new reflector geometries will be compared to the classical Eurotrough-type parabolic-trough geometry by means of the intercept factor and the tolerance to absorber displacements respect to the design location.

Different numerical models were developed in order to asses the influence of design and operating parameters such as bond conductance between absorber plate and tube, tube diameter, glass cover to absorber plate distance, optical properties of absorber and flow rate on thermal efficiency of collectors.

The results indicate that for any given PCM length, a combination of small taper ratio and large inlet hole-to-absorber area ratio are essential to increase the operation time and the average power produced during the night time.

A method is established to describe the detailed mass transfer process in a double-contact-flow reactor, which may be applied to absorbers of different scales.

The materials used for the two junction-forming layers must be dissimilar to the absorber in order to produce the built-in electric field and to carry the electric current.

To minimize the reflection of the incident wave to the absorber surface; we should try to get the impedance of free space close to impedance of the adsorbent.

And, r represents the percentage of the insulation layer attached to the absorber plate assumed to have the same temperature as the plate.