Sentence examples for tip materials from inspiring English sources
Furthermore, by fine-tuning the fabrication parameters, i.e., the amount and thickness of the deposited tip materials and total height of the structure, the size of the active nanoparticle sitting on the tip of the Au nanocone sensor can be controlled very accurately and more complex structures featuring multiple layers of different materials are easily achieved, as illustrated below.
Note the tip material configuration.
Localised plastic deformation in the soft-tip material may be manipulated by adjusting the material properties and geometries of the tip material alongside variables such as; the free blade length, the speed and the properties of the incoming coating.
In this study, a design option was exercised to eliminate the excessive stress gradient in the burner tip material.
Root-cause analysis of a burner tip failure is investigated employing stress modeling in the burner tip material in this study.
In reality, factors involved in the risk assessment often have many uncertainties, e.g., the variations in rock properties and cutting tip material properties.
For the tip-calcite contact, the bulk Young's modulus values for the tip material (Si) and the substrate (calcite) where used in the model, consistent with studies in other systems [47, 75].
Once the temperature distribution in the burner tip is determined, Finite Element Analysis (FEA) is employed using ANSYS to determine the maximum stress and deformations in burner tip material.
This flat crack propagation mode requires a balance of energy so that the work done due to applied tensile load σ ss on the body must equate to the energy required to break down the crack tip material J tip and the energy required to open the crack against fiber bridging from 0 to δ ss.
Degradation effects of such bifunctional probes resulting from mechanical wear or electrode fouling, which may be experienced by AFM SECM probes having the electroactive area exposed at the tip apex are avoided by using silicon carbide as AFM tip material, and by recessing the electroactive area from the tip apex.
Here, the rubbed tip material (bare IN-718, Rc = 43) and the abradable coating NiCrAl Bentonite (HR15Y = 52) were examined in the SEM and polished cross section to gain insight into the wear mechanism involved.
