Sentence examples for tip blockage from inspiring English sources

Tip blockage in the blade passage is greatly reduced by the choked injectors, which is the primary reason for stability enhancement.

Finally, a critical rotor tip blockage state usually existed for the transform of corner separation types at a certain rotor tip gap configuration.

The accomplishment of blockage diminishment is maintained in the circumferential direction with the unsteady effect of tip injection, which manifests as a hysteresis between the recovery of tip blockage and the recovery of tip leakage vortex.

Because of this enhanced vortical activity in the tip cavity, a blockage to the incoming pass-over flow is introduced and as a result tip leakage mass flow rate is reduced.

Using an actuator line technique, the effect of wind tunnel blockage ratio (defined as the ratio of the rotor swept area to the tunnel cross-sectional area) is investigated for a wide range of tip speed ratios from 1 to 12, and for four blockage ratios (0.2, 0.09, 0.05 and 0.02).

Both the new radial equilibrium in flowfield and transportation of low-energy fluids in boundary layer induced by sweep appear conductive to reduce shock wave and flow blockage in tip region of forward swept rotor SF.

For antibody blockage, the tip of pipette was loaded with normal pipette solution and the pipette was then backfilled with 300 nM mAb56.

Another blockage point is in the courts.

In this paper, blade resolved computations are used to carry out a cavitation analysis over a range of blockage ratios and tip-speed-ratios.

Dummy cannulas (28 G), extending 2 mm beyond the guide cannula tips, were inserted to prevent blockage.

To avoid the occasional blockage of the sorbent tip by the buffy layer, thawed plasma sample should be centrifuged at ∼2,000 3,000 g for 5 min and a clear portion is pipetted.