Sentence examples for time of fault from inspiring English sources

Results show that the type of excitation system, time of fault, and the generators rotating mass have large impact on the system stability.

The time of fault onset ranges between 5.3 and 2.2 Myr; overall the average slip rates of the various thrusts are in the range of 0.26 1.35 mm/yr.

It was revealed that when it comes to the design of the rotor magnetic shields, in addition to the eddy current distribution and the associated ohmic losses, two phase-to-ground fault should be taken into account since the produced electromagnetic forces in the time of fault conditions are more severe during double line-to-ground fault.

It can be seen that the output of SVM1 is +1 indicating no fault condition until t =0.077 s, time of fault occurrence, then it changes to -1 indicating a fault condition.

From Fig. 4, we know that if we enlarge the parameters (D_{f1}), (D_{f2}), the effect of fault on the output (y ( t )) will be larger, so the residual signal (hat{r} ( t ) ) becomes larger, and the detection time of fault will be reduced.

Both catastrophes result from the same time of fault rupturing with the same intensity.

The different deformation mechanisms and internal structures of shear bands are thought to be controlled by burial depth at the time of faulting.

As the domains are different in different regions of the World, the chronological definition cannot be univocal; i.e., different criteria are needed to define fault activity, which will depend on the characteristics of the local tectonic domain and of the related recurrence times of fault activation.

The factors identified are microgrid type and topology, DG type, communication type and delay time, method of fault detection and analysis, relay type, fault type, method of grounding, and use of smart transformers in microgrid.

Time series of fault input data and simulation results are presented in a common format, so to allow using the same statistical tools as used in power system monitoring and field data reporting.

The outage time of the fault segment load point is TTR, the upstream quarantine segment load point outage time is RT, and record the time duration of power outages and the insufficient of power supply.