Sentence examples for time of coating from inspiring English sources

At the time of coating, we used a MSNP/LB ratio of 1 1.1 (w/w).

We found that the defect density depends on sample position, deposition time, type of coating material, and batching material.

The median time of COAT randomization was 8 days from the start of antifungal therapy.

The results demonstrated that the shell thickness and microporosity could be tuned by times of coating process.

The blast wear test is less sensitive to coating microstructure, but the time of first coating failure as a quantitative wear criterion is helpful for improving the quality and adhesion of the diamond films.

They remained 159° and ⩽1°, respectively, even after 3 months storage under indoor conditions (20 °C, 20% RH), demonstrating the long time stability of coating superhydrophobicity.

The time evolution of coating resistance, capacitance, and permittivity obtained from the equivalent circuit model was studied to demonstrate the internal composition change of the coatings due to the flowing fluid.

The red rust generation time of Zn Mg coating was doubled compared with the Zn coating.

Furthermore, a residual stress evolution model for the LIHC was established, and it reveals that temperature difference between the composite coating and the substrate is the main inducement that leads to residual stress, and dwell time of the coating in the temperature range of 800 °C to 500 °C (t8 5) is an important factor that affects residual stress releasing.

There is a competition between the requirements for adequate workability time of the coating with appropriate film formation and recoat behavior.

Thesaltespray suggestestatimee electrofess Ni Pel plating procoatingdeveloped in the study is available for ZM6 alloy and the Ni–P coating obtained wash good adhesion could protect the substrate effectively.