Sentence examples similar to time damping from inspiring English sources

An animosity that time damped down for a while but now is bursting out again.

A rapid and time damped alternating discharge current was observed with a short oscillating period ∼ 0.6 μs and sustained for about 6 μs.

Results show that the damping of the composites oxidized at 700 °C and 1000 °C increases initially and then decreases with increasing oxidation time while that of the composites oxidized at 1300 °C is independent of the oxidation time.The damping capacity of the C/SiC composites is determined by the carbon fibers, PyC interphase, SiC matrix and their interaction.

A sufficient condition is derived to achieve the desired settling time for damping power system oscillations in face of plant and controller uncertainties.

Effectiveness of the proposed control technique is shown through numerical simulations and experiments in terms of the settling time and damping ratio of the first mode, in which the results are compared with those by passive and bang bang control.

A popular scenario for electron acceleration in solar flares is transit-time damping of low-frequency MHD waves excited by reconnection and its outflows.

This cross section was found very prone to instability and large-amplitude vibrations were observed also for high values of the Scruton number (product of non-dimensional mass times damping) and relatively low wind speeds.

It is demonstrated that performances and the frequency bandwidth in which the energy can be harvested can be both increased using time-varying damping.

In order to deal with unknown environments, the proposed GFEM not only estimates the stiffness of unknown environments but also systematically yields the desired time-varying damping for stable force control.

Based on a derived formula, a computer program is written and extensive parametric studies are performed to assess the effectiveness of the fluid damper and to identify beneficial damper relaxation time and damping coefficient at zero frequency.

The axial vibration response along y-direction requires more time to damp out than that for x-direction due to the anisotropic properties of the laminated plates.