Sentence examples for thrust cylinder from inspiring English sources
Then, the thrust cylinder would propel the cutterhead system to cut and crush the rocks.
Penetration rate can also be calculated on the basis of the distance excavated per cutter head rotation and expressed as an instantaneous penetration or as the average over each thrust cylinder cycle or other time periods listed above.
The conclusions are drawn in Section 5. Figure 1 shows that the main machine of TBM is consisted of the cutterhead system, the main drive containing the bearings and the motors, the thrust cylinders, the gripper cylinder and the other auxiliary components.
It provides a new arrangement for the thrust system hydraulic cylinders, under large change-of-direction forces or uneven geological bodies, which may prevent the segments from cracking due to an over-offset load.
Push brake cylinder back.
The effects of different uncertain models and parameters on the LSOAAC response field are also investigated deeply, and numerical results indicate that the impact made by the randomness in the thrust of the luffing cylinder F is larger than that made by the gravity of the weight in suspension Q.
Consequently, the linear map between the externally applied wrench imposed on the shield and the equivalent thrust forces of the cylinders is developed.
The functionality of the force model developed is twofold, i.e., it can be used either to estimate the thrust forces of the cylinders required to resist against the tunneling loads, or to predict the tunneling loads using the measured thrust forces of these cylinders, thus providing important theoretical basis for the design and control of the mechanism.
The system had to de designed to be versatile in raising and thrusting of multi- cylinders with odd numbers.
Three cylinders are then thrust through at an angle a few degrees of the vertical.
The influence of sound speed variations on the water pressure response is discussed, as well as the pressure on the thrust sides of the four cylinders.
