Your English writing platform
Discover LudwigExact(8)
Focused ion beam milling revealed the presence of subsurface crevices underneath a small fraction (∼ 10%) of coated areas, typically in areas with large cracks through the coatings.
Poly ether ester) multiblock copolymers were chosen as polymer matrix, to allow the diffusion of proteins through the coatings.
The holes through the coatings were carried out by means of a high velocity drilling machine (Restan).
The unsteady-state diffusivity of moisture through the coatings could be estimated from the diffusivity of water through the continuous fat phase and the partition coefficient of moisture between sucrose and cocoa powder and the fat phase.
The reasons for Si and B improving the oxidation resistance are discussed through analyzing the oxidation kinetics, phase compositions of oxide scales, morphology and elemental distributions through the coatings after oxidation.
Accordingly, it was suggested that higher surface energy due to the smaller mean grain size and energy dissipation due to decohesion through the coatings corresponds to higher adhesion in coatings with lower thicknesses.
Similar(52)
The problem is solved for piecewise and continuous through-the-thickness coatings stiffness variations.
Through-porosity of the coatings with open porosity below 0.1% was determined by using Inductively Coupled Plasma analysis of dissolved substance from substrate through the penetrating path of the coatings.
The work is based on computer simulation followed by validation through fabrication of the coatings and optical measurements.
The corrosion processes on the surface of the coatings and at through-coating defects are also being investigated electrochemically.
After spin-coating the solution uniformly to fabricate an active layer at 3000 rpm, the solvent was eliminated from the coatings through the vacuum furnace in 70 °C for 2 h.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com