Your English writing platform
Discover LudwigSuggestions(1)
Exact(3)
Hopping through each relay node introduces a unit delay.
By limiting the fraction of data relayed over each link and/or routed through each relay node, route diversity can be achieved, thus, extracting useful information from the network is rendered more challenging for adversaries.
We see that full spatial diversity is achieved by this relay selection method since there are K + 1 terms in (24), but the achieved frequency diversity through each relay is the minimum of the length of the source-to-relay and relay-to-destination channels.
Similar(57)
The coordination problem is solved for every topological change in the network and whose optimized settings are remotely adjusted on each relay through a SCADA system, enhancing the speed and sensitivity of the protection system.
Since the CSI required at the destination for any amplify-and-forward protocol has to be transmitted through to the destination through the relays, CSI can safely be assumed to be available at each relay node as well.
By passing through a relay that simulates the keyboard panel, the signal is then transferred into the circuit board from the keyboard.
In the TWRT mode, the two source nodes S 1 and S 2 transmit signal to each other through the relay node R. The TWRT mode is demonstrated in Fig. 1 b.
Generally speaking, a TWR network, where two sources deliver data to each other through a relay node as shown in Fig. 1, can apply an amplify-and-forward (AF) or a decode-and-forward or a denoise-and-forward [10], or a compress-and-forward [11] protocol while employing either the time division broadcast or the multiple-access broadcast (MABC) policy [12].
We consider a two-way relay network, with users U0 and U1 outside each other's coverage area, communicating through the relay R, as shown in Figure1.
Specifically, the two end nodes in each line, node 1 and node, exchange information through the relay nodes in between.
Two-way relaying (TWR) has attracted much interest recently[1 7], where two source terminals communicate with each other through an intermediate relay.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com