Sentence examples for threaded pin from inspiring English sources
The phrase "threaded pin" is correct and usable in written English
It can be used in contexts related to mechanical engineering, manufacturing, or assembly where a pin with threads is required for fastening or joining components.
Example: "To secure the two metal plates together, we will use a threaded pin that fits into the pre-drilled holes."
Alternatives: "screw pin" or "threaded fastener."
From this investigation, it is found that the joint made by taper threaded pin profiled tool underwater cooling medium exhibited higher tensile properties of 345 MPa and joint efficiency of 76 %.
2) The UWFSW-TTC joint fabricated using taper threaded pin profile with water cooling exhibited tensile strength of 345 MPa and joint efficiency of 76 %, which is 5%% higher than UWFSW-THC joint, 29%% higher than FSW-THC joint and 22%% higher than FSW-TTC joint.
The peaks and valleys of threaded pin profile offer more friction over the plasticized material which promotes sticking condition.
Second, the pin thread has an effect to trap material in the high-velocity zone inside the thread groove opening, which causes a many-circle flow pattern around the threaded pin.
The statistical results depict that UTS for threaded pin is larger than that for square pin.
During FSW process, the effect of the joint formation by the rotation of the threaded pin profile in clockwise direction and counter clockwise direction was analyzed with a schematic diagram.
These implants include Kirschner wires [14], smooth or Knowles pins [8, 27], fully threaded pins [1], Arbeitsgemeinschaft fur osteosynthesefragen (AO) screws [18], and Balser hook plate [22] with or without superior AC joint wiring, which acts as a tension band.
They bring specifically designed clamps to hold threaded pins up to 4 mm in diameter.
The rings were 15-mm wide and included 8-mm wide slots to place stabilizing elements, i.e. connection threaded bars, bolts for fixation of K-wires and clamps holding threaded pins.
If surgery is decided, the most frequent treatment modalities are open reduction and internal fixation with an angular stable plate, a locked intramedullary nail, or in some patients minimally open surgery with screws, threaded pins and sometimes cerclage wires.
In this Paper, FSW process is applied to join a Nylon 6 plate of 10 mm thickness with specially designed left hand threaded tool pin profile.
