Sentence examples for thread diameter from inspiring English sources

Although many screws are named by their major thread diameter, this is not always true.

The cephalic lag screws have a shaft diameter of 7.5 mm and an outer thread diameter of 9.7 mm.

These, in turn, depended on the screw thread diameter, number of coils as well as coil inclination angle.

Methods: Eight matched pairs of doubled 100-mm long tibialis anterior allografts were prepared and fixed in appropriately sized tunnels created in 10 lb/ft3 (0.16 g/cm3) dense synthetic bone blocks using screws of similar length and root and thread diameter designed with either a large buttress thread with a smaller taper or small buttress thread with a larger taper.

The cage screen had an opening size of 0.65 mm and thread diameter of 0.29 mm.

Screws were 14 mm in length, with a thread diameter of 3.5 mm and a core diameter of 2.8 mm.

Triple-threaded, cannulated headless screws of varying thread diameters and pitch are designed to maintain thread length across the arthrodesis plane, provide joint compression, and reduce countersinking.

The validation was conducted for two thread diameters and three incline angles.

The fracture fragments were fixed over the two guide wires using 4.0-mm cannulated screws (Sanatmetal, Hungary, titanium alloy, partially threaded, diameter of 4.0 mm, and length of 35 60 mm).

The effects of the thread inner diameter, yield stress, thread type, and strike velocity on the wave propagation characteristics are investigated.

The experimental results show that the measurement uncertainty of the thread minor diameter can reach ±10 μm, and the stability of the measurement system is better than 0.07%.