Sentence examples similar to thin pet from inspiring English sources

The appearance and evolution of lamellar orientation upon isothermal crystallization of ultra-thin PET layers from the glassy state are explored based on real time small-angle X-ray scattering (SAXS) studies.

(I) Light transmittance spectra of the Ag NW thin films (PET-based); transmittance values (at 550 nm) of (a) 93% for the sample containing Ag NWs of 30 ± 3 nm in diameter and (b) 86% for the sample containing Ag NWs of 45 ± 3 nm in diameter.

Polymer conductors on the other hand, have an elastic modulus comparable to that of the thin-film PET substrate, making them interesting for stretchable and elastic conductors.

Nanocomposite laminates of silicon oxide thin films onto PET were found to sustain higher scratch induced stresses and were effective as protective coating material for PET membranes.

By optimizing deposition condition, highly adherent DLC based thin films on PET have been achieved.

However, one problem with the Ag NW transparent electrode is that the Ag NW thin film on PET plastic substrate is easy to peel off and be scratched.

PET thin films rapidly cooled from the melt (cooling rates larger than 5°C/s) show a continuous variation of structure and properties depending on cooling rate.

The acid pretreatment followed by ECR-deposition was confirmed as an effective method for the good adhesion of copper thin film on PET substrate at room temperature.

A piece of Ag NW thin film on PET substrate was incubated in the HCl vapor (20 to 60°C) for approximately 10 min. The resistance dramatically reduced to below 500 Ω.

Ag NW thin films on PET substrate was incubated in the HCl vapor (20 to 60°C) volatilized from concentrated HCl for 5-10 min. The prepared NW films are easy to scratch and damage due to the weak adhesion to PET substrate.

b Optical images of the doctor-bladed thin SSQ films on PET substrates.