Sentence examples for thin brass from inspiring English sources

Second gear is engaged by using a long, thin brass lever on the driver's side.

The letter matrices are thin, brass 19 × 32-millimetre (0.7 × 1.3-inch) plates, with two ears and a system of 14 notches arranged in a V on the upper surface and two heels in their lower part.

Peebles, Ohio, serpentmound.org Church of St Sulpice As mentioned in Dan Brown's The Da Vinci Code, this 17th-century Parisian church features a meridian line that runs through the building in the form of a thin brass strip.

The cymbal transducer consists of an inner P-5 piezoelectric disk mechanically coupled to two thin brass end caps on each of its electrode faces by eccobond epoxy.

The investigation has the form of a case study; a thin brass plate-beam is used, it is excited with a short duration impulse, and the resulting disturbance spreads dispersively as it travels along the beam.

Experiments have been conducted in a 3 ft×2 ft (914 mm×610 mm) cross-section wind tunnel, using polypropylene carbonate (PPC) films, thin brass plates, polyethylene terephthalate (PET) sheets, and type 304 stainless steel sheets, with maximum dimensions 224 mm×168 mm.

Using a thin-walled brass tube as an overmoded waveguide to transmit a hybrid HE11 mode, it is possible to limit the losses to 1 dB across a 2 GHz bandwidth.

There is a serene Kota figure from Gabon whose flat elliptical face is quilted with thin strips of brass and copper.

If a small magnet sticks firmly to the surface, you probably have an object made from a different metal, then plated with a thin layer of brass.

The ionic liquid choline acetate was used as a cyanide-free electrolyte for the electrodeposition of copper zinc alloy (α-brass) thin films on a steel substrate.

Possible reasons for the thinner oxide on brass may be due to changes in the semiconducting and transport properties of the Cu2O-layer caused by the adjacent ZnO-layer.