Suggestions(5)
Exact(5)
Co2FeAl (CFA) films in a wide thickness range between 2 and 100 nm are sputtered at room temperature.
We have found that the limiting efficiency for cells in the thickness range between 40 and 500 μm is very similar and close to 29%.
The steam treatment of aluminium alloys with varying vapour pressure of steam resulted in the growth of aluminium oxyhydroxide films of thickness range between 450 and 825 nm.
The composite panels were varied in term of fiber direction and it was designed to withstand a distributed load of 5 kN service load in longitudinal (x-axis) and transverse (y-axis) direction on samples with thickness range between 4.00 to 4.20 mm.
Finally, the LAT segmentation performed similar to MS in the thickness range between 100 to 150 μm but below a thickness of 50 μm resulted in increasing accuracy errors with decreasing vessel thickness.
Similar(55)
Most of the samples taken from Phase 2 had just one paint layer generally relatively thin (35 50 µm thick approximately, except the white M2 with a paint layer thickness ranging between 50 and 300 µm) (Fig. 5).
The peat having a low amplitude extends across all the sections with thickness ranging between 3.8 and 6.0 m.
Results: On average true thickness ranged between 2.9 and 3.3 mm (95% confidence intervals; median, 3.1 mm).
For period thickness ranging between 5 and 80 nm, W N/W multilayer hardness increases as layer spacing decreases.
The average thickness ranged between 68 µm and 320 µm for Fe 10 wt.% Ti and for pure iron respectively.
The Pleistocene deposits attain a thickness ranging between 15 and 25 m and are built up of gravel, sand, pebbly sandstone, and sandy gravel beds.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com