Sentence examples for thickness of the compound from inspiring English sources

The thickness of the compound layer was about 400 μm.

Plasma nitriding of chromized steels increased the total thickness of the compound layer.

Especially, the thickness of the compound layer was mainly influenced by the gas pressure in the reactor.

A high thickness of the compound layer combined with a low nitriding depth leads to its earlier spalling and vice versa.

With increasing oxidation time, the thickness of the compound layer decreased due to the sputtering as a result of prolonged oxidation.

The thickness of the compound case and internal diffusion zone were compared for specimens pre-treated and non-pre-treated before gas nitriding.

By means of transmission and scanning electron microscopy and X-ray diffraction, the microstructures, including the thicknesses of the compound zones and the diffusion zones of the nitrided steels, were obtained.

According to the parabolic relationship, the square of the thickness of the intermetallic compound increases in proportion to the annealing time.

It has been observed that the initial surface condition and thickness of the white compound layer, play important roles in governing the final properties of the coating material.

It can be deduced that the tensile properties increased because of control over the heat input, which reduced the thickness of the intermetallic compound.

In particular, the addition of trace Ti into the Zn-22Al filler metal can refine the microstructures and decrease the thickness of the intermetallic compounds layer produced in the Cu/Al brazing.