Sentence examples for thickness of solution from inspiring English sources
During wet dry cycle, the thickness of solution layer trapped under disbonded coating decreases due to evaporation of water.
There exists a critical thickness of solution layer, below which the oxygen solubility is sufficiently low to support the electrochemical corrosion reaction of steel.
The lower level of solution should be as high as layer thickness of solution on the spinneret and increase the possibility of electrical discharge during electrospinning.
At the front of the receding interface, the thickness of solution becomes smaller than the diameter of nanoparticles (for non-spherical shape, the height of the building blocks) and a three-phase solution air nanoparticle interface is formed around the nanoparticle surfaces.
Each sample was placed in the reactor and submersed in 500 700 ml of MB water solution (1.3 ± 0.07 μmol l-1), ensuring that the thickness of the solution layer above the catalytic surface was constant (12 ± 1 mm) for all measurements.
The results clearly indicate that the aqueous solution channel thickness is the most significant design parameter that affects the absorber size compactness; the thinner the thickness of the solution channel, the higher the ratio (Am/Vnet).
For each of the multilayers, we have determined its mean thickness, porosity, tortuosity, and equivalent thickness of stagnant solution layer.
The direction of the capillary force depends on thickness of the solution layer, which depends on the substrate pattern, thicker in the trenches or holes.
We have described the monolayer effect in terms of the equivalent layer thickness of stagnant solution layer.
The optical thickness of the solution layer in MPM is then acquired by getting the full width half maximum (FWHM) of the peak in Fig. 5 d).
The thickness of the solution layer is designed to be around 250 μm so that it is neither too thin to increase the measurement error nor too thick to go beyond the image depth of OCT (600 μm) and MPM (400 μm).
