Sentence examples for thickness of oxide from inspiring English sources

As Cr content of the coatings increased, the thickness of oxide scales decreased and oxidation resistance improved.

After isothermal oxidation at 1200 °C for 200 h, the thickness of oxide layer (TGO) in the sample produced by low energy density laser remelting was ~ 5.6 μm, which was thinner than that of oxide layer in as-sprayed (~ 7.6 μm) and high energy density laser remelted (~ 7.5 μm) samples.

Numerical calculations show that the relative increment of the tunneling current through the gate oxide will decrease with increasing the thickness of oxide layer when the oxide is a few nanometers thick.

The thickness of oxide layer formed affects the friction and wear characteristics under fretting conditions.

Through the Design of Experiment (DOE) method, it presents the way to keep the thickness of oxide layer during rolling copper wire at the level requested by customer.

The microstructure and thickness of oxide scale layer of stainless steels were obtained and two or three oxide layers can be found.

Considering the surface roughness, the thicknesses of oxide layer and Ni-free layer, the surface Ni concentration, the proper oxidation times for oxidized specimens are found to be 60 min for Ni50Ti50 and 30 min for Ni40Ti50Cu10.

Special optical sensors require thin film devices with a layer structure of the type glass/Al/Al2O3 with thicknesses of oxide and metal in the range of some nm.

The thicknesses of oxide films were monitored ellipsometrically.

Equivalent oxide thickness of gate oxide can be reduced by the usage of high-k dielectric materials and it was found that by replacing high-k dielectric materials as gate oxide the performance of the device can be improved.

The thickness of inner oxide layer reaches 20% of that of the outer oxide layer.