Sentence examples for thickness of mortar from inspiring English sources

The natural carbonation depth was found to have a negative correlation with the compressive strength of concrete and thickness of mortar cover.

When the thickness of mortar coating was over 8 mm, no carbonation was observed in existing concrete structures having an age of up to 25 years.

You want each tile to have a consistent thickness of mortar for an even top later but you don't want it so thin that you have poor adhesion.

In the proposed analytical model, the variation of the shear stresses along the thickness of the mortar was gained.

Thickness of the mortar layer.

Their authors hypothesized that, although "the large area of the painted surfaces without joints is puzzling" [78], this could be feasible because the thickness of the mortar and the polishing of the mural would maintain the necessary dampness for a long time.

Similarly, the old mortar area fraction (A om) in RAC can be derived as A_{om} = 1 - A_{oa} - left( {1 - A_{oa} } right){ exp }left[ { - pi {kern 1pt} N_{A} left( {t_{1} h + t_{2} h^{2} } right)} right]^ (5 where N A is the number of recycled aggregate particles per unit area of concrete; h is the thickness of old mortar; and t 1 and t 2 are the coefficients of h.

Have enough so that when you have made my two passes with the notched trowel, you cannot see any of the back of the tile and the total thickness of the mortar is the depth of the notches plus about 1/8".

A statistical analysis of geometrical parameters (width and height of blocks, thickness and length of mortar joints) allows to estimate their probability distribution and to identify the typology of the texture.

The dimension r a in Fig. 1 denotes the radius of the natural aggregate, r b  − r a is the thickness of the old mortar in RAC and r c  − r b is the thickness of the new mortar.

Results show that for a typical wall with insulation thickness of 75 mm, mortar joints with Hmj = 10 mm (4.8% thermal bridge area) increase peak, daily, and yearly cooling and heating transmission loads by 62%, while the wall R-value decreases by 38% compared to similar wall with no mortar joints (Hmj = 0).