Sentence examples for thickness of dropped from inspiring English sources

The length, width, and thickness of dropped branches with leaves were measured in the five large plots between October 2007 and March 2011.

And the volume resistivity in the direction of thickness dropped sharply from 1.0 × 105 Ω m to 1.0 Ω m after N-P deposition for 10 min.

After thermal annealing at 230 °C for 15 min, a thickness of the drop decreases on about 30% (see Additional file 1: Figure S5 (b), c)).

In this case, the GNPs were formed between the conductive glasses and very thin TiO2 layers of 1.3 μm thickness by dropping GNP solutions on the surface of the conductive glass and drying naturally.

In exactly the same manner as exhibited by the rubber particle-modified compositions described in the previous communication, the toughness of the CaCO3-filled materials increased dramatically when the mean interparticle ligament thickness of the matrix polyethylene dropped to values below 0.6 μm.

The experimentation on thermal characteristics was carried out using a high-temperature flame to estimate temperature drop across the thickness of coating called thermal drop (TD) and a number of cycles withstood known as thermal fatigue cycles (TFC) (Lakshminarayanan and Balasubramanian 2007).

The J sc reaches a maximum value of 1.34 matcm2 athehe P3HT thickness of 10 nm and then drops with further decease of the thickness to 5 nm due to the insufficient absorption.

The numerical results are used to verify and validate the concept design and prototyping of off-highway heavy-duty trucks, including parameters and components such as: the speed of cooling fans; core size of the heat exchangers; temperature; pressure drop; thickness of insulation and design options of the heat shield.

Working with his research assistant Dorian Raymer, he took some string — about the thickness of a computer-mouse cord — and dropped it into a small square plastic box.

They observed that the efficiency initially rises with increasing thickness of the active layer and then dropped after reaching the optimum thickness.

First, the thickness of the insulation increases, tending to drop the heat transfer because the temperature gradient decreases.