Sentence examples for thickness increment from inspiring English sources

Finally, the relationship between thickness increment Δh, annealing temperature T and holding time t of isothermal annealed TZ20 alloy has been deduced.

Increase in the number or in the length of radial scan lines increased the thickness increment and the bending angle, induced due to the resultant shrinkage in the periphery of the blanks.

The well-known technique of effective substrate thickness increment is performed to improve the impedance bandwidth, whereas for size reduction the electrical length of the conducting patch has been increased.

Both bending angle and thickness increment for circular and radial scan schemes, respectively, were found to increase with reducing laser beam diameter and scan speed, and increasing laser power.

Our results clearly show that the studied hybrid polyurethane family allows a drug release rate that is effectively manipulated through variation in polymer Tg, degradation rate, and thickness increment rate.

Notably, the film thickness increased as the PCBM content in film was increased for same processing condition, so that domain swelling by nanoparticles was self-adjusting with film thickness increment.

FE results indicate that thickness increments of the GFRP module significantly reduce the mid-span deflection of the composite deck and subsequently increase the ultimate load.

Results of present study show that peak of longitudinal strain in the edge of channel section increases with the bending angle increment and strip thickness increase, but decreases with the flange width, web width and distance between the roll stands increasing.

Reduction of flange angle thickness or increment of gage distance from the angle heel to the centerline of bolt hole can increase the magnitude of prying force.

Five hundred thirty-eight axial slices with 609 × 609 resolution and a slice thickness and increment of 0.3 mm and pixel spacing of 0.3 mm were obtained.

A dedicated cardiac reconstruction will be added to the standard (thoracic) post-processing workflow, namely images will be reconstructed with a 0.6 mm slice thickness, an increment of 0.4 mm and a Bv36 kernel (Advanced Modelled Iterative Reconstruction, ADMIRE, strength 3).