Sentence examples for thickness growth from inspiring English sources

Thickness growth kinetics of α plate in TZ20 alloy was investigated by designing various heat treatments.

An increase in anodizing voltage leads to layer thickness growth, increased roughness and changes in surface phase composition.

These values were further validated by comparing the thickness growth of the Li-rich phase and the lithiation time.

The thickness growth of dipping-LBL films is clearly exponential, whereas the SS-LBL films exhibited a lower growth rate.

The TGO thickness growth rate and parabolic oxidation rate constant are influenced by the surface roughness of coatings.

The rate of film thickness growth was found to be proportional to the O2− anionic current through the barrier layer near the metal|oxide interface.

A power law is adopted to model the creep behavior of TGO and bond-coat (BC), and TGO growth at high temperature with the consideration of both lateral and through-thickness growth strains is simulated.

The lateral sizes, thicknesses, growth prisms, and surface morphologies were completely different, which could be attributed to dominant kinetic effect in melt growth conditions.

Two different nitrogen-free In0.25Ga0.75As QDs samples [0.5- and 1.2-nm nominal thicknesses, growth temperature (thermocouple reading) 730°C and 655°C respectively, see also Tables 1 and 2] were chosen as reference points to count the emission energy shift.

As the oscillation period depends on the increase in the crystal thickness during growth, we can separately determine the growth rates of the basal faces.

All the films were of submicron thickness with growth rates in the range of 34 82 nm/min and either voided columnar or dense growth morphology.