Sentence examples for thickness effect is from inspiring English sources
The explanation for the thickness effect is as follows.
In contrast to the majority of the existing failure criteria, the adhesive layer thickness effect is described correctly.
Results of the simulation prove that the equilibrium assumptions can still be safely used in the case of test on polymers, and indicate that the thickness effect is mainly due to the radial inertia and friction considerations.
In the thin films with SPLs, the thickness effect is caused by the sharp increase of dislocation density near the film-passivation interface, while it is mainly due to the sharp decrease of dislocation density within the refined surface grains of the thin films with SGRZs.
In comparison with other studies, where the growth of TiN coatings at low nitrogen pressure generally exhibited a strong (111) orientation while it changes to (200) direction with increasing fraction of nitrogen in the discharge [17, 18, 19], however, the thickness effect is found to be more pronounced in determining TiN texture growth on bare substrate in our study.
A pronounced thickness effect was detected.
For HFMI-treated T-joints, a reverse thickness effect was observed with negative thickness correction exponents, and the thickness correction exponents increased with material strength.
As the through-thickness effect is properly accounted for by assuming only transverse shear stress fields, the natural frequencies are therefore accurately calculated.
Possible laminate thickness effects were studied but judged to have negligible impact in the fracture toughness of these materials.
The thicker thin films without surface treatment are stronger than the thinner ones; however, opposite thickness effects are captured in the thin films with SPLs or SGRZs.
The displacement field of the refined plate theory is modified by assuming a parabolic variation of the transverse displacement through the thickness, and consequently, the thickness stretching effect is taken into consideration.
