Sentence examples for thermal preparation from inspiring English sources

Thermal preparation involved cold crystallization at 145 °C of quenched, compression-molded plaques.

The (100) preferred orientation of Tb-doped PbTiO3 films is attributed to the heterogeneous nucleation mechanism of the perovskite PbTiO3 phase induced by Tb doping and rapid thermal preparation process.

It is shown, that by bringing elemental copper into solutions containing poly-sulphides or sulphur, or by a well-known step-wise thermal preparation method, relatively pure substances can be attained.

Apply a pre-straightening or thermal preparation product before using a hair straightener.

In contrast to traditional thermal pyrolysis preparation of g-C3N4, the present thermal condensation was improved via pyrolysis of thiourea in an alumina crucible without a cover, followed by secondary heat treatment.

The research is focused on developing a heat pipe heat exchanger for domestic hot water and thermal agent preparation, preheating / heating the air from ventilation systems in buildings, using as a primary agent the return of the existing heating system.

Based in the Bavarian town of Landsberg, Rational has a 54% share of the global market for thermal food preparation appliances -- ovens, steamers and grills -- used in large-scale and commercial kitchens.

For the applications in solar thermal power, the preparation and optimization of an Al/NbMoN/NbMoON/SiO2 multilayer solar selective absorbing coating are carried out by combining experiments with optical simulation.

The lamellar crystal morphology of thin films of poly aryl ether ketone ketone) having a meta-linkage (PEKK(I)) is observed under transmission electron microscopy (TEM), utilizing samples with different thermal histories and preparation procedures.

The scope of the work begins with the delivery of a wood chip feedstock at a conversion plant and ends with the supply of electricity to the grid, incorporating wood chip preparation, thermal conversion, and electricity generation in dual fuel diesel engines.

The heating rate of outlet syngas, strata floor and roof was relatively slow as the main purpose of this phase was to preheat the coal seam and accumulated thermal energy, in preparation for latter phase (Stanczyk et al. 2011; Krzysztof et al. 2012).