Sentence examples for thermal gains from inspiring English sources

In fact, lightweight, highly insulated buildings cannot provide the necessary mass to buffer thermal gains.

This strategy facilitates the desired thermal gains in the winter and reduces unwanted thermal contributions in the summer, without a loss of external views.

However, thermal gains from the system during the cooling season increase cooling loads and tend to increase overall space conditioning loads.

Due to solar and internal thermal gains within the interior of a house, the base temperature is lower than the heating setpoint temperature and can be found from experience (i.e., observed number of heating days) or dynamic simulation.

For a typical day in Montreal (with 4 7 m/s average wind speed), it was found that the thermal gains between solar collectors at different locations over the same roof could vary up to 21%.

A simple algorithm was then used to calculate the overall cooling load to ascertain that the daylighting strategies used do not invoke an increase in thermal gains through walls and glazings.

In present study, the concentrated photovoltaic thermal (PVT) has been proposed for higher thermal gain.

From the thermal point of view, glazing increased the thermal gain of the PV-CPC system.

The results show that annual thermal gain is 1% higher for flat-PVT (F) compared to flat-PVT (UF).

Performance in terms of electrical gain (EG), thermal gain (TG), overall exergy gain (OEG), overall thermal gain (OTG), electrical efficiency (EE) and overall exergy efficiency (OEE) of the DCSPVT module (case-I) have been compared with single channel semitransparent photovoltaic thermal (SCSPVT) hybrid module (case-II).

Different parameters of the PV/T collector such as cell and air temperatures, thermal gain, PV current and voltage, and fill factor have been investigated.