Sentence examples for thermal deterioration from inspiring English sources

EPDM, with the double bonds located in the side groups, is much less susceptible to degradation by weathering and sunlight, because any breaking of the double bonds by ozonolysis, thermal deterioration, or oxidation leaves the main chains intact.

EPDM, with the double bonds located in the side groups, is much less susceptible to degradation by weathering and sunlight; although the double bonds can be broken by ozonolysis, thermal deterioration, or oxidation, such processes will not break the main chains.

Coatings can be used as an engineering key to improve surfaces against corrosion, wear, thermal deterioration and other surface phenomena.

The thermal deterioration of RPC is assessed using ultrasonic pulse velocity, water absorption and sorptivity.

However, the hard mask deposition before the patterning of FP must be achieved at low temperature (<200°C) to avoid polymer thermal deterioration.

Warm Spray enables various materials to fabricate coatings without thermal deterioration of the original characteristics such as purity and crystallographic phase.

Maldistribution with low standard deviation and high positive skew will give low thermal deteriorations, though a distribution with negative skew is preferred for low hydraulic performance losses.

On the other hand, PHB purified by chemical treatment showed severe thermal stability deterioration.

However, PHB obtained by alkaline treatment resulted in significant thermal stability deterioration, despite of the high purity and recovery yield obtained.

The effectiveness of the WC Co coating to protect carbon steel substrates against thermal fatigue deterioration and attack by molten aluminum was proved.

The results indicate that the thermal performance deterioration of the evaporative coolers may become significant for some typical operating conditions and could be as high as 10%, while it lies less than 5% for most conservative conditions.