After the final wash, pellets were resuspended in the original volume of modified kinase assay buffer, resulting in functional, washed core complexes.
As shown in the table, with the increase of the concentration of CA solution, the secondary pore volume of modified USY zeolite increases firstly and then decreases.
The results showed that the secondary pore volume of modified samples could reach 0.145 cm3/g, 43.9% of the whole pore volume, and the amount and intensity of medium strong acid as well as the thermal stability of modified USY were favorable.
The secondary pore volume of modified USY zeolite increase with the increase of reaction temperature, which is to be expected.
The secondary pore volume of modified USY zeolite increases with the increase of reaction temperature as expected.
It can be seen from Table 1 that the surface area and pore volume of modified meso-SAPO-11 with citric acid at 23 °C did not change obviously.
Table 4 Surface area and pore volume of modified USY before and after hydrothermal treatment Sample BET surface area, m2/g Micropore area, m2/g secondary pore area, m2/g Total volume, cm3/g Micropore volume, cm3/g Secondary pore volume, cm3/g CFUSY 594 479 150 0.43 0.25 0.20 CFUSY-SR 567 441 172 0.40 0.23 0.24.
Clostridium cellulolyticum ATCC 35319 or H10 (Ccel) was cultured anaerobically at 35°C in 250 mL flasks with 100 mL working volume of modified DCB-1 medium [ 56] supplemented with 2.0 g/L of glucose, xylose, cellobiose, or 5.0 g/L of cellulose (Avicel PH101), xylan (from oat spelts) or milled corn stover.
The volume of storage water modified the kinetics.
For the different mixtures considered in this research, the volume of water was modified while the mass of aggregates and cement were kept constant.
