Increase in soil temperature by 1 °C increased the correlation length by about 0.6 m only at the upper depth.
The results from parametric analysis further show that the best location of CFRP grids is in the horizontal direction of the pavement within the upper depth of the pavement.
Therefore, limiting the vessel motion amplitude, optimizing the vessel towing speed, maintaining a lower marine riser package (LMRP) at the riser bottom to strengthen axial tension, and using slick joints with larger wall thicknesses in the upper depth may be effective engineering considerations.
The upper depth limit of low-frequency earthquakes is close to the depth of geofluid reservoirs, though the location is different in the map view.
As the upper depth of the low-resistivity structure is approximately 6 km, the magma probably climbed to the depth of the sill and then migrated laterally, forming a new sill or opening a pre-existing sill.
According to The Headquarters for Earthquake Research Promotion (2016), the earthquake source fault is right lateral with a normal fault component, and the upper depth, length, width, azimuth, dip, slip angle, and slip amount of the fault are estimated to be 0.1, 27.1, 12.3 km, 235°, 60°, −161°, and 3.5 m, respectively.
For the upper-depth range (1 5 km), the conductivity pattern presented in the EPRI model roughly reflects geometry of the sedimentary cover.
In all land use types, the highest soil BD was observed in the upper soil depth range, 0 15 cm, followed by the 15 30 cm depth.
Finally, SIC stocks at three depth intervals in the upper 1 m depth were mapped across the entire study area by applying predicted soil depth functions at each location.
The Vs30 (average shear wave velocity down to 30 m depth), which is obtained from the MASW technique, plays a critical role in evaluating the site response of the upper 30 m depth.
However, most have focused on the upper 30 cm depth.
