Sentence examples for the trail length from inspiring English sources

The trail length of the T-shaped plate was varied in order to bring the head of the T-shaped plate in action at different positions so that an optimum position of the head of the T-shaped plate for reducing fluid forces could be identified.

These results are consistent with expectations from thermal activated processes and are a strong indication that T 0 − 30°C is less than T C. From the trail length, the average droplet velocity can also be estimated at 10 to 15 μm per hour.

This is supported by the relationships between trail length and the other trail properties.

There are no midstations, so it has the longest average trail length in New England.

From the result, it was found that, when the T-shaped plate with a trail length of 0.70 1.00 times the cylinder diameter is used, an optimum reduction in fluid forces occurs, and the interference effect of the downstream cylinder on the upstream cylinder is completely suppressed.

Calculations are based on a returning trip along 20 meters, which is the average A. heyeri's trail length (personal observations).

This track crossing is the site of the only train station along the trail's length.

However, F-F trails show no significant relationship between trail length and either trail strength (Pearson: r = 0.32, n = 44, P = 0.26) or foraging differential (Pearson: r = 0.04, n = 44, P = 0.075).

Comparison of aerial photography from 1957 , 1981 and 2004 coupled with ground surveys in 2009 reveal an increase in trail length and number and show an upslope expansion of a trail system around points of stream channel initiation.

In 2004, the trail system continued to advance upslope with more intense braiding; however, much of the original downslope trail observed in 1957 could no longer be seen in 2004 imagery, such that total trail length remained stable relative to 1981 at 7,890 m (Fig.  4d).

The layout of nests, trees, and trails was mapped from the compass bearing of the trails and length of trails measured using a trundle wheel (e.g., Figure 1, further examples in Supplementary Data 1).