Sentence examples for the total applying from inspiring English sources

In the previous year, the total applying in both categories fell slightly.

They carry the difference between the total applied vertical force and the ultimate axial capacity of the sheeting calculated above.

Total BC recovery at 0 5 cm depth in the BC-treated soils amounted to 45 66% of the total applied amount of BC.

It should be noted that each beam was symmetrically loaded with two concentrated loads and consequently, the shear force equals half the total applied load.

The ductility ratio is 4.67 and the peak lateral strength is also high, namely about 26% of the total applied vertical load.

The long-term study revealed the persistence of As under aerobic soil conditions, and a limited, but perceptible, mobility of As (0.87% of the total applied As drained beyond 1.5 m) resulting from interacting physical, chemical, and biological factors.

As a consequence of the vast differences between the capacitances shown in Fig. 3, one expects that there exists a broad variation in the way how the total applied voltage VA splits between the potential drop VD across the EDL and the voltage VQ pertaining to the change in graphene's chemical potential.

Using the values of B, H and G for Type A and B specimens (as shown in Fig. 1), the bar tensile loads (PA and PB) were derived as: PA = 1.25F; for Type A specimens; PB = 1.50F; for Type B specimens where F is the total applied load determined by the load cell.

Annual losses of TN through runoff and leaching were 13.7 48.1 kg ha-1 from the rice-wheat cropping system, accounting for 5.6%8.3%% of the total applied N. It was concluded that reduction in the N fertilization rate, especially when the crop was small in biomass, could lower the N pollution potential for water systems.

The total applied voltage demand in practice is for a great part dependent on the overpotential at the electrodes.

Globally, 61% of the total amount applied reached the target, i.e. the crop.