Sentence examples for the top coating from inspiring English sources

The crack mainly propagated in the top coating for as-sprayed condition and at the top-coating/bond-coating interface after thermal aging for 2000 h.

Therefore, it is favourable to select the nanostructured CSZ as the top coating for improving the thermal insulation capability of thermal barrier coatings.

The deposition of dye on the various coatings revealed that a small amount of anionic binder in the top coating favoured the absorption and spreading of dye and solvent, whereas a higher binder dose closed the pores and reduced the dye fixation and rate of solvent absorption.

Low friction coatings such as DLC, nitrides and oxides can be used as the top coating layer, which can not only increase wear resistance but also diminish interfacial shear stress and strain, and reduce the tendency for debonding of top coatings.

Peel off and eat little shards of chocolate, one by one, till the top coating is gone.

The top coating was separated from the buffer layer by a distinct epitaxially grown austenitic layer.

Furthermore, thermal conductivity λ of the top coat increases.

Thus the top coat comprises of LTA/YSZ/Al2O3 ceramic top layer.

The final failure was governed by delamination at the top coat and bond coat interface.

Finally, to preserve the colour, the top coat of nitro-cellulose lacquer is applied.

Improving The strain accommodation through segmented cracks produced by laser-glazing and reducing the penetration ofailureofthe V2O5 by laser-glazed layer are TBCsmajor mechanisms for extending the lifetime of the TBC.